How do I get EPA 608 certification?
Updated: · Checked: 2026-11-21
Pick the type you need (Type I, II, III or Universal), study the Core plus your type, and pass a closed-book, proctored test with an EPA-approved certifying organization (70% to pass; 84% for mail-in Type I). The program must send your results and wallet card no later than 30 days after the test, and the certification does not expire.
To get EPA 608 certification you pass a test given by an EPA-approved certifying organization. EPA itself does not give the test and does not issue cards. The whole process fits in five steps.
The 5 steps at a glance
| Step | What you do | Official rule or source |
|---|---|---|
| 1. Pick your type | Choose Type I, Type II, Type III or Universal based on the equipment you work on | 40 CFR 82.161(a) |
| 2. Study | Learn the Core topics plus the topics for your type | EPA test topics page |
| 3. Choose a program | Pick a certifying organization from EPA's approved list | EPA list of certification programs |
| 4. Take the test | Closed-book, proctored test (mail-in is allowed only for Type I at some programs) | Appendix D to Subpart F |
| 5. Get your card | The program must send results and a wallet card no later than 30 days after the test | Appendix D to Subpart F |
Step 1: Pick the certification type you need
The regulation (40 CFR 82.161) ties each type to the equipment you service:
- Type I: small appliances (factory-sealed with 5 pounds or less of refrigerant).
- Type II: medium-, high- and very high-pressure appliances, except small appliances and motor vehicle AC.
- Type III: low-pressure appliances.
- Universal: all of the above.
Not sure which one fits your job? Read our guide Which EPA 608 certification do I need? Note that registered apprentices can work without a card if they are "closely and continually supervised by a certified technician."
Step 2: Study the Core and your type
Every Type I, II or III test has 25 Core questions plus 25 questions for that type (50 total). The Universal test has 100 questions: 25 Core plus 25 each for Type I, II and III. Core covers the ozone layer, the Clean Air Act and Montreal Protocol, Section 608 rules, refrigerants and oils, recovery, recycling and reclaiming, evacuation, safety and shipping.
The best free starting point is EPA's own Section 608 test topics page. EPA says it "does not review or approve any training preparatory programs or materials," so no study guide is "EPA approved," including ours. To check how ready you are, try our free practice test or drill one section at a time: Core, Type I, Type II, Type III.
Step 3: Choose an EPA-approved certifying program
Only programs on EPA's list of Section 608 technician certification programs can give the real test. The list shows notes for each program, such as "Remote testing available," "Online testing only," "Spanish available" or "Type I mail-in tests available." Programs marked with an asterisk (*) are only for their own company's employees.
Programs "may charge individuals reasonable fees," so prices vary. Check the program's own website for the current fee. Our page where to take the EPA 608 exam walks through the list.
Step 4: Take the proctored test
For Type II, Type III and Universal you must pass a closed-book, proctored test given "in a secure environment." On test day:
- Bring photo ID. Proctors must check it (driver's license, government ID card, passport or military ID are examples EPA gives).
- No notes or study materials during the test.
- The passing score is 70%. For a mail-in Type I test it is 84%. See what the passing score is.
A mail-in Type I test does not count toward Universal, and EPA says a Core taken open book can't be used for Universal either. If you plan to go Universal, take everything proctored. You can take Universal all at once or build it by combining passing scores on separate Type I, II and III tests.
Step 5: Get your card and keep a copy
The program must tell you your results and issue a wallet-sized card no later than 30 days from the test date (for mail-in Type I, 30 days from when they receive your test). The card shows your name, your type, a unique number (not your Social Security number) and the program's name.
- Your certification does not expire, according to EPA's certification requirements page.
- You must keep a copy of your certificate at your place of business.
- Lost it? EPA has a page with steps for replacing a lost card.
Quick checklist
- Decide on Type I, II, III or Universal.
- Read EPA's test topics and practice the Core plus your type.
- Pick a program from EPA's approved list and confirm its fee and format.
- Show up with photo ID and pass with 70% or more.
- Watch for your results and card within 30 days.
Ready608 is an independent practice site, not a certifying organization. You take the real test with an EPA-approved certifying organization.
Quick answers
Does EPA give the 608 test or issue the card?
No. The test must be given by an EPA-approved certifying organization, and that organization issues your card. EPA says it does not issue certification cards.
How long does it take to get my card?
The program must issue your wallet card no later than 30 days from the date of the test. For a mail-in Type I test, the 30 days start when the program receives your completed test.
Do I need to take the Core test?
Yes. Every Type I, II and III test includes 25 Core questions plus 25 questions for that type, and the Universal test includes 25 Core questions plus 75 type questions.
Does EPA 608 certification expire?
No. EPA says Section 608 technician certification credentials do not expire. EPA reserves the right to require recertification in the future through a Federal Register notice.
Can I work before I'm certified?
Only as an apprentice registered with the Department of Labor's Office of Apprenticeship (or a recognized State Apprenticeship Council), closely and continually supervised by a certified technician, for up to two years from first registering.
What to do next: Ready to book the real test?
See EPA-approved certifying organizations, including remote testing and Spanish options.
Where to take the exam →Sources
- EPA: Section 608 Technician Certification Requirements
- EPA: Section 608 Technician Certification Programs
- EPA: Section 608 Test Topics
- eCFR: 40 CFR 82.161 Technician certification
- eCFR: Appendix D to Subpart F of Part 82 (test standards)
- eCFR: 40 CFR 82.152 Definitions
- EPA en español: Reseña del Programa de Certificación para Técnicos (Sección 608)
- EPA: Steps for Replacing a Lost Section 608 Technician Certification Card
Checked: 2026-11-21. Ready608 is an independent study tool, not EPA or a certifying organization.