What is the passing score on the EPA 608 test?
Updated: · Checked: 2026-11-21
You need 70% to pass the closed-book Type I, Type II, Type III and Universal tests, and 84% on a mail-in Type I test (40 CFR Part 82, Subpart F, Appendix D). Each section has 25 questions, so 70% works out to 18 of 25 correct; Universal has 100 questions.
The passing score for the EPA 608 test is 70% for the closed-book Type I, Type II, Type III and Universal tests. The only exception is the mail-in Type I test, which needs 84%. Both numbers come straight from Appendix D to 40 CFR Part 82, Subpart F, paragraph (e).
Passing score by test
| Test | Questions | Official passing score | Correct answers needed (our math) |
|---|---|---|---|
| Core section | 25 | 70% | 18 of 25 |
| Type I, II or III section | 25 | 70% | 18 of 25 |
| Type I, II or III test (Core + type) | 50 | 70% | 35 of 50 |
| Universal test | 100 | 70% | 70 of 100 |
| Type I mail-in, per 25-question section | 25 | 84% | 21 of 25 |
The percentages are the official figures. The "correct answers" column is plain arithmetic: 70% of 25 is 17.5, so you need 18 to reach 70%. 84% of 25 is exactly 21. EPA does not publish these counts itself.
How many questions are on the test
Appendix D sets the size of each test:
- Every Type I, Type II and Type III test has 25 Core questions and 25 questions for that type, so 50 in all.
- The Universal test has 100 questions: 25 Core plus 25 each for Type I, Type II and Type III.
- Questions come from an EPA question bank that is released only to approved certifying programs, and programs must use multiple versions of the test at each testing event.
See the EPA 608 exam format page for the full layout.
Is the 70% per section or for the whole test?
This is the part most people get wrong. Appendix D gives one passing score "for the closed-book Type I, Type II, Type III and Universal certification test." It does not say whether that 70% is applied to each 25-question section or to the whole test. Grading section by section (Core, Type I, Type II, Type III) is how a certifying program sets up its scoring, not an EPA rule.
What this means for you:
- Ask your program how it scores before test day, and what happens if you pass one section and miss another.
- Plan for the stricter case. Aim for at least 18 of 25 in every section, so you pass no matter how the program grades.
- Appendix D does say Universal "may be taken all at once, or by combining passing scores on separate Type I, Type II, and Type III tests." So passing types on different days and adding them up to Universal is allowed.
Why mail-in Type I needs 84%
Programs that offer Type I only may use a mail-in format. Because it is not proctored in person, EPA set a higher bar: 84% instead of 70%. Two catches:
- A mail-in Type I score cannot be used toward Universal.
- EPA says a Core test taken open book cannot be used for Universal either. For Universal, the Core must be proctored.
On EPA's list of approved programs, programs that offer mail-in Type I are marked. When we checked the list today, one program had that note: the State Board of Refrigeration Contractors (North Carolina). The list changes, so check it yourself.
When you get your score
Certifying programs must tell you your results no later than 30 days from the test date (for mail-in Type I, within 30 days of receiving your completed test). Your wallet card must also be issued within 30 days.
What EPA does not publish
- Time limit: EPA does not set one in the published rules. Ask your program.
- Size of the question bank: not published.
- Retake rules and retake fees: set by each program. Check with yours.
How to hit 70% with room to spare
- Study from EPA's official test topics list for Core and your type.
- Take a timed mock and score each section on its own. If any section is under 18 of 25, that is your weak spot.
- Drill that section until you are steady above 80%, so a hard version of the test doesn't knock you under 70%.
Our free practice test is a quick way to see where you stand before you book. Ready608 is an independent practice site. You take the real test with an EPA-approved certifying organization.
Quick answers
How many questions do I need right to pass a 25-question section?
18. The official passing score is 70%, and 70% of 25 is 17.5, so 18 correct is the lowest count that reaches 70%. For a mail-in Type I section at 84%, it is 21 of 25.
Is the 70% applied to each section or to the whole test?
EPA's rule gives one passing score for the test and doesn't spell this out. Section-by-section grading is a certifying program practice, so ask your program and aim for 18 of 25 in every section.
How many questions are on the Universal test?
100: 25 Core questions plus 25 each for Type I, Type II and Type III. The passing score is 70%.
Can I pass the types on different days and combine them into Universal?
Yes. Appendix D says Universal may be taken all at once or by combining passing scores on separate Type I, Type II and Type III tests. A mail-in Type I score can't be used for Universal.
Is there a time limit on the EPA 608 test?
EPA does not publish a time limit in its rules. Each certifying program sets its own test session, so ask the program you book with.
What to do next: See where you stand
Take the free 25-question EPA 608 sample test. No sign-up.
Take the free test →Sources
- eCFR: Appendix D to Subpart F of Part 82 (test standards, passing scores)
- eCFR: 40 CFR 82.161 Technician certification
- EPA: Section 608 Technician Certification Requirements
- EPA: Section 608 Technician Certification Programs
- EPA: Section 608 Test Topics
Checked: 2026-11-21. Ready608 is an independent study tool, not EPA or a certifying organization.